Power On/Off; Operation - Roca MULTICLIN ADVANCE RF Manuel De L'utilisateur

POWER ON/OFF

Press and hold on auxiliary control for 3 second to shut off the product. To power on again
the product,press and the icon on the led display will be active.
1. Cleaning function adjustment
1) Sit on the MULTICLIN, the sensor switch will be activated and the led will be active.
2) Selecting cleaning function.
- For Anal (rear cleaning), please press
- For Perineal (front cleaning), please press
- Water Pressure settings. Press
- Pressing the buttons repeatedly until the preferred pressure is reached. There are five levels of water
pressure adjustment.
3) The function displayed on the LCD :
4) Stop cleaning
- Press button to stop the water cleaning.
Note:
1)
2) This product is equipped with high pressure protection device. It is considered as a normal situation
while there is water released from weep hole during cleaning function.
2. Adjusting Water Temperature
1) Press Water Temp
Repeat until preferred level is achieved.
2) There are four temperature levels: OFF<low<medium<high
3) The function displayed on the LCD :
3. Oscillating Cleaning
1) To change to pulsating washing mode, press and hold
3 seconds. To deactivate and return to pulsating washing mode, repeat the above step.
IMPORTANT The water pressure level must be at level 3 or above for massage washing mode.

OPERATION

button.
button.
or to adjust water pressure.
button to adjust the water temperature.
Off Low
35˚ C
Note:
Both cleaning function can't
working at the same time.
Medium High
37.5˚ C 40˚ C (±2°C)
or cleaning button for over
09 08