Roca MULTICLIN ADVANCE RF Manuel De L'utilisateur page 12

10
4. Select Air Dryer function
1) Press
Note:
Dryer function will automatically stop after 5 minutes. Please push the button again to activate the
function.
5. Adjusting Air Dryer Temperature
1) Press
2) There are three temperature levels: OFF<low<medium<high
3) The function displayed on the LCD :
6. Seat temperature adjustment
1) Press
2) There are 4 temperature levels: OFF<Low<Medium<High
3) The function displayed on the LCD :
DO NOT inert fingers or any other objects into the intake fan port .
The setting of water and seat temperature will take a few minutes to heat up.
Temperature settings are stored in memory according to the last settings.
In case of power supply shortage this settings will be reset.
button to start the dryer, press
button to activate warm fan, repeat until preferred temperature is achieved.
Low
45˚ C
to adjust the seat temperature. Repeat until preferred level is achieved
Room
temperature
OPERATION
button to stop the dryer.
Medium High
52˚ C 59˚ C (±5°C)
Off Low
Medium
35˚C 37.5˚C
High
40˚ C (±3°C)