Initial Start-Up; Booting The System; Installing Click Me - Fujitsu LifeBook A6230 Instructions

Masquer les pouces Voir aussi pour LifeBook A6230:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Initial Start Up
If you purchased a Color Lid for notebook
Be careful when installing the color lid.
Excessive force could damage your LCD.
Hinges
Place the color lid on your notebook, by aligning
each hook with its corresponding hinge.
Attach the other hooks one by one in the direction
of the arrows.
Note: The system shown is for illustration purposes
only. Your model may look different.
opening
the display
panel
LAN Jack
Right Panel Wireless LAN/UWB/Bluetooth
on/off Switch
1. open the Display Panel
2. Connect AC Power
3. Connect to Internet or Network

4. Booting the System

5. Installing Click me!

6. Register
Power/Suspend/
Resume Button
Ensure that your LifeBook is on a hard level surface and that
the air vents are not blocked.
Lift the display, being careful not to touch the screen.
Adjust the display until it is at a comfortable viewing angle.
Plug the AC adapter into your notebook.
Plug the power cord into the AC adapter.
Connect the power cord to an electrical outlet.
Connect the Ethernet cable to the LAN jack on your notebook and
to a wall jack or to an Ethernet router.
Important:
During the setup procedure, do not disconnect the power supply,
press any buttons, or use any peripheral devices such as a
remote control.
• You should not attach any external devices and do not put a DVD/CD in
your drive until you have gone through the initial power on sequence.
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
Be careful when you select the language.
The only way to change the language
is to do a recovery process.
Press the Suspend/Resume/Power button (above the keyboard) to
turn on the notebook. When you do this for the first time, it will display
a Fujitsu logo on the screen. If you do nothing the system will load
the operating system, and then the Windows Welcome will begin.
Check to be sure the WLAN switch is on.
For Genuine Windows Vista
desktop, a dialog box will automatically open that prompts
you to run Click Me!. If you choose not run ClickMe! at this
time, the ClickMe! icon will remain on your desktop.
When you click the Click Me! icon, your system will automatically
build the icon tray in the bottom right of the screen. These icons
provide links to utilities that you will frequently access.
DO NOT install Genuine Windows Vista
if you are planning on using Windows
Windows Vista
32-bit edition.
®
• For the latest 64-bit drivers, please go to http://www.fujitsu.com/us/
support/ and follow the links to the downloads. Fujitsu Driver Update
(FDU) will be listed with the 64-bit downloads for each model.
If the FDU Icon is missing from Windows taskbar notification
area, please download and install FDU package from the support
website. This application will keep your notebook up to date with
the latest released drivers.
For Genuine Windows Vista®:
Accept the Microsoft
Windows
®
Fujitsu End User License Agreement to proceed.
Select your User ID and Password during the "Welcome Screen."
• Keep a record of your User ID and password stored in a secure place.
• THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.
Do not attempt to turn power on or off during this stage.
For
Additional
CLICK ME
Utilities
"Click me!"
: In addition to an icon on the
®
64-bit edition
®
®
XP or Genuine
Licensing Agreement and the
®
3

Publicité

Table des Matières
loading

Table des Matières