Initial Start-Up - Fujitsu LifeBook MH380 Guide Pratique

Initial Start Up
AC Adapter
LAn Jack
Power/Suspend/
resume Button
1. open the Display Panel
Display Cover
2. Connect AC Power
3. Connect to Internet or network
DC Power Jack
4. Booting the System
DC output Cable
AC Cable
5. Installing Click me!
6. registering Your fujitsu notebook
7. Access your User's Guide
• Ensure that your notebook is on a hard level surface and that
the air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
• Plug the AC adapter into your notebook.
• Plug the power cord into the AC adapter.
• Connect the power cord to an electrical outlet.
• Connect the Ethernet cable to the LAN jack on your notebook
and to a wall jack or to an Ethernet router or by using the
WLAN On/Off key combination (Fn + F5).
Important:
• During the setup procedure, do not disconnect the power
supply, press any buttons, or use any peripheral devices.
• You should not attach any external devices until you have
gone through the initial power on sequence.
Be careful when you select the language.
The only way to change the language
is to do a recovery process.
• Press the Suspend/Resume/Power button (above the
keyboard) to turn on the notebook. When you do this
for the first time, it will display a Fujitsu logo on the
screen. If you do nothing the system will load the operating
system, and then the Windows Welcome will begin.
It is critical that you run ClickMe! to install necessary
applications, utilities, and drivers.
• Before installing the Clickme! Utility, be sure the wireless LAN
device is enabled by pressing the [FN] + [F5] key combination.
Wireless Indicator will be visible when on.
• The first time you boot up your system,
you will see an icon called Click Me! in
the Start menu. We highly recommend
that you install the ClickMe! utility
the first time you boot up. When you
click the Click Me! icon, your system
will automatically create the related icons in the system tray
in the bottom right of the screen. These icons provide links to
utilities that you will frequently access, such as wireless LAN
software provided by the wireless LAN manufacturer.
• If the FDU Icon is missing from Windows taskbar notification
area, please download and install FDU package from the
support website. This application will keep your notebook
up to date with the latest released drivers.
• Register your notebook with Fujitsu Service and Support via
our website at us.fujitsu.com/computers.
• You will need to be set up with an Internet Service Provider
(ISP) to register online.
• To take advantage of all the features of your new Fujitsu
notebook, it is highly recommended that you read your
electronic User's Guide. It contains important detailed infor-
mation about your new computer. You can access your
User's Guide by selecting its icon from the screen desktop.
• It is critical that you run ClickMe! to install necessary
applications, utilities, and drivers.
for
Additional
for
Applications
Latest
Utilities
Drivers
Drivers
"Click me!" (fDU)
3