Initial Start-Up - Fujitsu LifeBook T5010 Guide Pratique

Initial Start Up
Rotating
Display
DC Power Jack
modem
Jack
WLAN/Bluetooth/
WWAN Switch
Lid
Top Latch Display Side
Bottom
Latch
AC Adapter
LAN Jack
Power/Suspend/
Resume Switch
1. open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that the
air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
To avoid possible damage to your computer, be sure
the display panel is perpendicular to the keyboard
before rotating it.
Caution
2. Convert from Notebook to Tablet
• Open your notebook and lift the display so it is perpendicular
to the keyboard.
• Rotate the display 180 degrees (either direction).
• Carefully fold the display down onto the keyboard.
• Push the latch down toward the display.
• Reverse this procedure to return to the notebook configuration.
Be sure to rotate the display in the opposite direction.
3. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
4. Connect to Internet or Network
• Move the wireless switch to "On" to turn on the notebook.
• Connect the phone cord (not supplied) to the modem jack (available on some
models) or an Ethernet cable (not supplied) to the LAN jack
on your notebook and to a wall jack or to Ethernet router.
5. Turn on Power
• Press the Suspend/Resume switch.
• The notebook is now on and the battery is being charged.
• The notebook will begin a power-on self test. Once successfully completed, the
operating system will begin the initialization process.
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
6. Register
For Genuine Windows Vista
• Accept the Microsoft ® Windows
End User License Agreement to proceed. Select your User ID and
Password during the "Welcome Screen." Keep a record of your
User ID and password stored in a secure place. THE SCREEN WILL
GO DARK FOR APPROXIMATELY TWO MINUTES. Do not attempt to
turn power on or off during this stage.
• Register your LifeBook with Fujitsu Service and Support via our website
(us.fujitsu.com/computers). This helps us to better
serve you.
For Genuine Microsoft
®
• After the operating system has initialized, accept the Microsoft
Windows Licensing Agreement and the Fujitsu End User License
®
Agreement to proceed. Then enter the information as prompted
to personalize your notebook and configure your modem to dial.
7. Activate Additional Utilities & Drivers
• Check to be sure the WLAN switch is on.
For Genuine Windows Vista
• In addition to an icon on the desktop, a dialog box will
automatically open that prompts you to run Click Me!.
If you choose not run ClickMe! at this time, the
ClickMe! icon will appear on your desktop. When
you click the Click Me! icon, your system will
automatically build the icon tray in the bottom
right of the screen. These icons provide links to
utilities that you will frequently access.
For Genuine Microsoft
®
• Please refer to your XP Drivers Installation flyer the first
time that you power-on your system.
:
®
® Licensing Agreement and the Fujitsu
Windows XP Tablet PC:
®
:
®
Additional
"Click me!"
Windows XP Tablet PC:
®
®
(For
Utilities)
3