Initial Start-Up - Fujitsu LIFEBOOK LH531 Manuel

Initial Start Up
opening the
Display Panel
DC In
Ethernet/LAN
Wall Jack
Wireless Device Switch
Power/Suspend/
Resume Button
All manuals and user guides at all-guides.com
AC Adapter
AC Cable
Connecting the
LAN Device
LAN Port
1. open the Display Panel
• Ensure that your LIFEBOOK is on a hard level surface and that
the air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
3. turn on Power
• Press the Power/Suspend/Resume button.
• The notebook is now on and the battery is being charged.
• The notebook will begin a power-on self test. Once successfully
completed, the operating system will begin the initialization
process.
4. Starting Windows
First time
When configuring Windows
the WLAN. Otherwise, there may be issues when
activating Click Me!.
Caution
• Accept the Microsoft ® Windows
Fujitsu End User License Agreement to proceed. Select your User
ID (optional) and Password during the "Welcome Screen." Keep
a record of your User ID and password stored in a secure place.
THE SCREEN WILL GO DARK FOR SEVERAL MINUTES. Do not
attempt to turn power on or off during this stage.
5. Activate Additional Utilities,
Applications, & Drivers
Check to be sure that your LIFEBOOK is NOT
connected to a network or the Internet..
Caution
• Move the WLAN switch to the on position (to configure WLAN and
Bluetooth) and check to be sure your LIFEBOOK is NOT connected
to the network or the Internet.
Ensure that the AC adapter is connected and supplying power
to your notebook before activating Click Me! It will take 25 to
30 minutes for Click Me! to install and configure your drivers
and utilities.
• In addition to an icon on the desktop, a dialog box
will automatically open that prompts you to run
Click Me!. If you choose not to run Click Me! at
this time, the Click Me! icon will appear on your
desktop. When you click the Click Me! icon,
your system will automatically build the icon
tray in the bottom right of the screen. These
icons provide links to utilities that you will
frequently access.
6. Connect to the Internet or Network
• Ensure the wireless switch is "On" to turn on the wireless device,
or—
• Connect an Ethernet cable (not supplied) to the LAN jack on your
notebook and to a wall jack or to Ethernet router.
• Register your LIFEBOOK with Fujitsu Service and Support via
our website (us.fujitsu.com/computers). This helps us to
better serve you.
for the
®
® 7, skip the step to setup
® Licensing Agreement and the
(For
Additional
Applications
and Utilities)
"Click me!"
3