Initial Start-Up; Booting The System - Fujitsu LIFEBOOK LH531 Guide Rapide

Initial Start Up
opening the
Display Panel
DC In
Ethernet/LAN
Wall Jack
Wireless Device Switch
Power/Suspend/
Resume Button
AC Adapter
AC Cable
Connecting the
LAN Device
LAN Port
(For
Additional
Applications
and Utilities)
"Click me!"
1. open the Display Panel
• Ensure that your LIFEBOOK is on a hard level surface and that
the air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
3. Connect to Internet or Network
• Connect an Ethernet cable to the LAN jack on your notebook and
to a wall or cable jack, or connect to a wireless Ethernet router
by moving the Wireless Device switch to on.
Important:
• During the setup procedure, do not disconnect the power supply,
press any buttons, or use any peripheral devices such as a
mouse or keyboard.
• You should not attach any external devices or put a DVD/CD in your
drive until you have gone through the initial power on sequence.

4. Booting the System

The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or an Auto/Airline adapter to use your notebook.
• Press the Power Suspend/Resume button (above the keyboard) to
turn on the notebook. When you do this for the first time, it will display
a Fujitsu logo on the screen. If you do nothing, the system will load
the operating system, and then the Windows Welcome will begin.
5. Register
• Accept the Microsoft
Fujitsu End User License Agreement to proceed.
• Select your User ID and Password during the "Welcome Screen."
• Keep a record of your User ID and password stored in a secure place.
• THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.
DO NOT ATTEMPT TO TURN POWER ON OR OFF DURING
THIS STAGE.
6. Registering Your LIFEBooK notebook
• Register your notebook with Fujitsu Service and Support via our
website at us.fujitsu.com/computers.
• You will need to be set up with an Internet Service Provider (ISP)
to register online.
7. Installing Click me!
To verify a successful installation, the application icons will appear
on the desktop. This process can take up to 15-20 minutes.
It is critical that you run Click Me! to install necessary
applications, utilities and drivers.
For all Fujitsu LIFEBOOK LH531 configurations with
Dual-Layer optical drives, you must Install Click Me!
Be sure the LIFEBOOK Wireless device switch is on.
• The first time you boot up your system, you will see an icon called
Click Me! in the Start menu. When you click the Click Me! icon,
your system will automatically create the related icons in the
system tray in the bottom right of the screen. These icons provide
links to utilities that you will frequently access.
• When you install the Click Me! utility, several applications and
utilities are installed; this takes time. While Click Me! is installing,
(For
Latest
the system may go into Suspend mode. If this should occur, push
Drivers)
the Power/Suspend/Resume button momentarily to wake the system
up. Alternately, while Click Me! is installing, slide your finger
across the touchpad every few minutes to keep the system awake.
(FDU)
Windows Licensing Agreement and the
® ®
3