Cancel Function; User Mode; Adjusting The Water Softener - Zanussi ZDT16020FA Notice D'utilisation

CANCEL FUNCTION

Press and hold simultaneously
mode.
With this function you can cancel the running programme or the delay start.

USER MODE

Press and hold simultaneously
start to flash and the display is blank.
In user mode can be changed:
• The level of the water softener according to the water hardness.
• The activation or the deactivation of the acoustic signal for end of programme.
• The deactivation of the rinse aid dispenser when you want to use the Multitab option without rinse aid.
• The level of rinse aid according to the required dosage.
These settings will be saved until you change them again.

ADJUSTING THE WATER SOFTENER

While the appliance is in user mode:
1. Press .
• The indicators
• The indicator
• The display shows the current setting: e.g.
and
and
, and
continues to flash.
until the appliance is in programme selection
until the indicators
go off.
= level 5.
, , and
23