Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPTION DELAY
max.
1. Set the programme.
2. Press
until the display shows the delay time you want to set (from 1 to 24 hours).
3. Close the appliance door to start the countdown.
When the countdown is completed, the programme starts.
OPTION MULTITAB
1. Set the programme.
2. Press and hold simultaneously
and
until the indicator
comes on.
Activate this option when you use multi-tablets that integrate the salt, rinse aid and detergent functions.
They can also contain other cleaning or rinsing agents.
This option deactivates the release of salt. The salt indicator does not come on.
With the use of this option the programme duration is prolonged to increase the cleaning and drying
results with the use of multi-tablets.
OPENING THE DOOR WHILE THE APPLIANCE OPERATES
If you open the door while a programme is running, the appliance stops. When you close the door, the
appliance continues from the point of interruption.
END OF THE PROGRAMME
When the programme is completed and you open the door, the appliance is automatically deactivated.
Close the water tap.
28
Publicité
Table des Matières
