Cancel Function; User Mode - Zanussi ZDI26001XA Notice D'utilisation

SETTINGS
PROGRAMME SELECTION MODE
The appliance is in Programme selection mode when, after the activation, the display shows number of the
programme Eco.
• The display shows the programme duration after some seconds.
When the appliance is in Programme selection mode it is possible to set a programme.
If the control panel does not show this condition, do the Cancel.

CANCEL FUNCTION

Press and hold simultaneously
With this function you can cancel the running programme or the delay start.

USER MODE

While the appliance is in programme selection mode:
1. Press and hold
• The indicators
In user mode can be changed:
• The level of the water softener according to the water hardness.
• The activation or deactivation of the rinse aid empty notification.
These settings will be saved until you change them again.
and until the appliance is in programme selection mode.
and .
, and starts to flash.
23