Starting A Programme - Zanussi ZDI26001XA Notice D'utilisation

• 5 minutes after the completion of the programme.
• After 5 minutes if the programme has not started.

STARTING A PROGRAMME

1. Keep the appliance door ajar.
2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme
selection mode.
3. Press one of the programme buttons until the display shows the number of the programme you want to
set.
• The display shows the programme duration after some seconds.
4. Set the applicable options.
5. Close the appliance door to start the programme.
OPTION XTRADRY
Activate this option when you want to boost the drying performance. With the use of this option, the
duration of some programmes, water consumption and the last rinse temperature can be affected.
TheXtraDry option is not a permanent option and must be selected at every cycle.
This option in not applicable to Rinse and Hold .
OPTION DELAY
1. Press Delay until the display shows the delay time you want to set.
2. Close the appliance door, the countdown starts. The Delay indicator comes on. The countdown starts
to decrease with steps of 1 hour.
When the countdown is completed the programme starts.
max.
27