DURAVIT SensoWash Slim Notice D'utilisation page 30

• Keep the power cord away from hot surfaces and sharp edges.
• Do NOT use the product if it is not working properly.
Disconnect from the power supply immediately. Close the stop
valve to interrupt the water supply. Contact help@duravit.com.
Avoid malfunctions and damage to the product as a result of
improper use.
cAuTIoN
> Supply the device with cold drinking water from the main water
EN
system.
> Do NOT connect any waste water, grey water, industrial water,
sea water or other untreated or semi-treated water.
• If the SensoWash
location, condensation may form. Leave the unit switched off
for a few hours.
• Do NOT install the SensoWash
ger of frost. The room temperature must not be less than 4°C.
• Do NOT place open fire sources, candles, cigarettes, or similar,
on the SensoWash
• Do NOT expose the SensoWash
• Do NOT climb on or stand on the product.
• Do NOT place any heavy objects on the lid.
• Do NOT deliberately soil, spray or block the spray wand.
Repairs must only be carried out by a person with the neces-
sary expertise.
• Do NOT carry out modifications, tamper with, install additional
equipment or attempt to repair the SensoWash
• Repairs must be carried out by qualified electricians or techni-
cians.
• Improperly performed repairs can lead to accidents, damage
and malfunctions.
• Do NOT use attachments not recommended by Duravit.
28
Health damage and potential product damage!
is moved from a cold location to a warm
®
.
®
in rooms where there is a dan-
®
directly to water or sunlight.
®
.
®