Install The Faucet Trim, Spout And Drain; Install The Door Enclosure - Kohler K-1000-H2 Guide D'installation

17. Install the Faucet Trim, Spout and Drain

CAUTION: Risk of property damage. You must adequately seal the valve, spout and other
plumbing fittings to prevent water leakage behind the finished wall.
Install the faucet trim and spout according to the manufacturer's instructions. Seal around the
plumbing fittings with a high-quality sealant.
Install and connect the drain according to the instructions packed with the drain.
Fill the footbath basin with water and check for leaks.

18. Install the Door Enclosure

Install the door enclosure according to the manufacturer's instructions. Follow all sealing and
installation instructions carefully to ensure trouble-free door operation and to limit moisture and
heat loss.
CHECK POINT # 9.
Confirm that:
¤ The faucet trim and spout are installed.
¤ The drain assembly is installed.
¤ The footbath is filled with water and checked for leaks.
¤ The door enclosure is installed.
¤ The switch is installed and sealed with silicone sealant.
¤ The switch wiring connections are made.
1030200-2-C 24 Kohler Co.