Kohler K-1000-H2 Guide D'installation page 19

Make the Electrical Connections (cont.)
NOTE: Your wiring harness included an antenna for the optional remote control. Do not alter or damage
this antenna during installation.
CHECK POINT # 6.
Confirm that:
¤ Two 208-240 V, 20 A, 50/60 Hz electrical services are provided.
¤ Each service is protected by a GFCI or ELCB.
¤ An earthing conductor is in place.
¤ The copper bonding wire is connected to an open lug on a junction box.
Kohler Co. 19 1030200-2-C