Ricoh MPC 2800 AT-C2 Mode D'emploi page 669

If the RK4 is disconnected for 10 seconds when this SP is set to "1 (Enable)", the machine
automatically jams a sheet of paper and stops.
001 -
[Copy NV Version]
5188
Displays the version number of the NVRAM on the controller board.
001 -
5191 [Mode Set] DFU
-
001
Enables or disables the STR (Suspend to RAM) mode.
5193 [External Controller Info. Settings]
-
Sets the external controller type. This setting is appropriately adjusted if an external controller
is installed in the machine.
[0 to 10 / 0 / 1/step]
001 0: No external controller installed
1: EFI controller
2: Ratio controller
3: Egret controller
4 to 10: Reserved
5195 [Limitless SW] DFU
-
001
Selects the paper feed mode.
[0 or 1 / 0 / 1/step]
*ENG 0: Disable
1: Enable
- -
[0 or 1 / 1 / -]
*CTL
0: Off, 1: On
- -
[0 or 1 / 1 / -]
*CTL 0: Productivity priority
1: Tray priority
System Service Mode
8
301