Ricoh MPC 2800 AT-C2 Mode D'emploi page 560

8. Appendix: SP Mode Tables
001 MUSIC Start Time (EDT)
002 TM Sensor Position
[Music A/D Interval]
2198
ADC Trigger Counter
001 ADC Trigger Counter
[Music Error Time Setting]
2199
DFU
001 Error Detection Counter
[LD Power] LD Power Control
Adjusts the fixed LD power for each line speed and color.
2221
These SPs are activated only when SP3-041-002 is set to "0".
Plain: 154 mm/sec, Thick 1 and Thick 2&Fine: 77 mm/sec
001 Plain: Bk
8
002 Plain: M
003 Plain: C
004 Plain: Y
009 Thick 2&FINE: Bk
010 Thick 2&FINE: M
011 Thick 2&FINE: C
012 Thick 2&FINE: Y
[Development DC Bias] Development DC Bias Adjustment
Adjusts the development bias.
2229
Development bias is automatically adjusted during process control; therefore, adjusting these
settings has no effect while Process Control (SP3-041-001 Default: ON) is activated.
192
*ENG [10 to 40 / 20 / 10ms/step]
*ENG [50 to 500 / 105.5 / 0.1mm/step]
[7.5 to 20 / 10 / 0.1 μs/step]
*ENG
*ENG [0.5 to 4 / 2.5 / 0.1 sec /step]
*ENG
*ENG
*ENG
[0 to 200 / 100 / 1%/step]
*ENG
Increasing this value makes the image density
*ENG
darker.
*ENG
*ENG
*ENG