Ricoh MPC 2800 AT-C2 Mode D'emploi page 632

8. Appendix: SP Mode Tables
007 Process Control
008 MUSIC
009 OPC Drive Control
010 Charge AC Control
011 Blade Damage Prevention
[Toner End Prohibition Setting]
3519
Enables or disables each adjustment at toner near end.
001 Process Control
002 MUSIC
003 TC Adj.
8
[ITB Idling Number]
3520
Specifies the number of the ITB idling rotation for each condition.
001 Temperature: H
002 Temperature: M
003 Temperature: L
004 Temperature: L: Power ON
[Temperature Threshold]
Specifies the threshold temperature for each condition. These settings affect the conditions
3521
of SP3-520.
t1: Threshold between L (low temp.) and M (medium temp.)
t2: Threshold between M (medium temp.) and H (high temps)
264
[0 to 2 / 0 / 1/step]
*ENG 0: OFF. 1: ON (once),
2: ON (twice)
[0 to 2 / 0 / 1/step]
*ENG 0: OFF. 1: ON (once),
2: ON (twice)
*ENG
[0 or 1 / 0 / 1/step]
*ENG
0: OFF. 1: ON
*ENG
*ENG [0 or 1 / 1 / 1/step]
0: Permit (adjustment is done even toner near
*ENG
end condition)
1: Forbid (adjustment is not done at toner near
*ENG
end condition)
*ENG
*ENG
[0 or 3 / 0 / 1 revolution/step]
*ENG
*ENG