Ricoh MPC 2800 AT-C2 Mode D'emploi page 634

8. Appendix: SP Mode Tables
001 Bk (Current)
002 M (Current)
003 C (Current)
004 Y (Current)
005 Bk (Target Display)
006 M (Target Display)
007 C (Target Display)
008 Y (Target Display)
009 Bk (Standard Target Set)
010 M (Standard Target Set)
011 C (Standard Target Set)
012 Y (Standard Target Set)
8
013 Environmental Correction
014 K (Max Correction)
015 M (Max Correction)
016 C (Max Correction)
017 Y (Max Correction)
018 K (Max Abs Hum)
019 M (Max Abs Hum)
020 C (Max Abs Hum)
021 Y (Max Abs Hum)
266
*ENG
Displays the current development gamma for
*ENG
each color.
*ENG
[0 to 5 / - / 0.01 mg/cm
*ENG
*ENG Displays the target development gamma for
each color.
*ENG
[0 to 5 / 0.85 / 0.01 mg/cm
*ENG [0 to 5 / 0.8 / 0.01 mg/cm
*ENG [0 to 5 / 0.77 / 0.01 mg/cm
Displays the standard target development
gamma for each color.
*ENG
[0 to 5 / 0.9 / 0.01 mg/cm
*ENG
*ENG [0 to 5 / 0.85 / 0.01 mg/cm
*ENG
Turns on or off the environmental correction for
target development gamma.
*ENG
[0 or 1 / 1 / - ]
0: Not Correct, 1: Correct
*ENG
Adjusts the maximum correction value for each
*ENG
color. These SPs are effective only when the
setting of SP3-611-013 is set to "1".
*ENG
[0 to 5 / 0.1 / 0.01 mg/cm2/kv/step]
*ENG
*ENG
Adjusts the maximum humidity correction value
*ENG
for each color. These SPs are effective only when
the setting of SP3-611-013 is set to "1".
*ENG
[1 to 99 / 15 / 1 g/m3/step]
*ENG
2
/kV /step]
2
/kV /step]
2
/kV /step]
2
/kV /step]
2
/kV /step]
2
/kV /step]