Ricoh MPC 2800 AT-C2 Mode D'emploi page 582

8. Appendix: SP Mode Tables
• The paper leading edge area can be adjusted with SP2622.
001 Paper Transfer
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2601 is multiplied by these SP values.
2621
• The paper leading edge area can be adjusted with SP2622.
002 Separation DC
[OHP: Switch Timing: Lead. Edge]
2622
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer
002 Separation DC
[OHP: Trailing Edge Correction] OHP: Trailing Edge Correction
8
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2603 and SP2608 are multiplied by these SP values.
2623
• The paper trailing edge area can be adjusted with SP2624.
001 Paper Transfer
002 Separation DC
[OHP: Trailing Edge Correction]
2624
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
paper trailing edge between the erase margin area and the image area.
001 Paper Transfer
002 Separation DC
2630 [OHP: Environment Correction]
214
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
[0 to 400 / 100 / 5%/step]
*ENG [–100 to 0 / 0 / 1 mm/step]
*ENG [0 to 50 / 0 / 2 mm/step]