Additional Information - Samsung BD-E8300 Manuel D'utilisation

Appendix

Additional Information

Note
3D Settings
• For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie
• Depending on the content and the position of the picture on your TV screen, you may see vertical
TV Aspect Ratio
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option which is different than the aspect ratio of your TV screen,
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides of picture).
BD Wise (Samsung Products only)
• When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise
Settings
• If the product is connected to a device that does not support BD Wise, you can not use the BD
• For proper operation of BD Wise, set the BD Wise menu of both the product and the TV to On.
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital,
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
PCM Downsampling
• Even when PCM Downsampling is set to Off, some discs will only output downsampled audio
• HDMI
70
|
English
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the 5 button once.
The Blu-ray menu appears. Press the 5 button again, then select 3D Settings in the Blu-ray
menu.
black bars on the left side, right side, or both sides.
then the picture might appear to be distorted.
appears in the Resolution menu.
Wise function.
DTS), the audio signal outputs as PCM.
through the optical digital outputs.
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the
product may output PCM 2ch downmixed audio even though you selected Bitstream (either
Reencoded or Unprocessed) in the setup menu.
- If your TV is not compatible with PCM sampling rates over 48kHz, the product may output
48kHz.