Connected Device - Samsung BD-E8300 Manuel D'utilisation

Audio

Connected Device

Choose an equipment that you have connected to this
product to hear the sound in addition to your TV.
Loudness of DTV Program will be adjusted according to
your equipment.
 AV Receiver : Select this If you use a general AV
Receiver / Home Theatre Equipment or a Television to
hear sound.
 AV Receiver (Offset Mode) : Slect this if your case is
one of two shown below.
- If you use THX Certified AV Receiver / Home
Theatre Equipment.
- In case "Digital Output" is set to "Bitstream",
and If you feel the the Dolby Audio much louder
than MPEG1 Layer2 Audio while watching DTV
Program, select this even if your AV Receiver is
not THX Certified one.
 Stereo Device : Select this if you use a Stereo
Amplifier or Recording Device that support Optical
Digital Audio Input as PCM format.
| NOTE |
\ For users whose TV is the only sound-producing device:
- If the TV does not support Dolby Digital bitstream input via
HDMI, no specific setting is required.
- If the TV supports Dolby Digital bitstream input via HDMI,
set "Digital Output" to "PCM".
By doing so, the "Connected Device" will not require
further setup.
\ If the DTV Program you are watching is produced according
to EBU R128, The Average Loudness between MPEG1 Layer2
Audio and Dolby Digital / Dolby Digital Plus audio can be
reduced. If the DTV Program do not meet the EBU R128,
There may be still some amount of difference of average
Loudness between a TV Programs.
\ Substantial number of AV Receiver / Home Theatre Device
decode Dolby Digital / Dolby Digital Plus with +4dB OFFSET
when compared to same encoding level of PCM input.
This kind of product include both THX Certified one and also
none THX Certified one.
If user select "AV Receiver(Offset mode)", the average
loudness between Dolby Digtial / Dolby Digital Plus audio
decoded by such a product and MPEG1 Layer2 Audio
decoded by this product will be similar.
25
|
English