By Downloaded; Standby Mode Upgrade - Samsung BD-E8300 Manuel D'utilisation

By Downloaded

The By Downloaded option lets you upgrade
using a file the product downloaded earlier but
you decided not to install immediately or a file
downloaded by the product in Standby Mode.
1.
If upgrade software has been downloaded,
you will see the software version number to
the right of By Downloaded.
2. Select By Downloaded, and then press the
v button.
3.
The product displays a message asking if you
want to upgrade. Select Yes. The product
begins the upgrade.
4.
When the update is complete, the product
turns off automatically, and then turns on.
| NOTE |
\ When the system upgrade is done, check the software
details in the software update menu.
\ Do not turn off the product during the software update.
It may cause the product to malfunction.

Standby Mode Upgrade

You can set the Standby Mode Upgrade function
so that the product downloads new upgrade
software when it is in Standby mode.
In Standby mode, the product is off, but its Internet
connection is active. This allows the product to
download upgrade software automatically, when
you are not using it.
1. Press the ▲▼ buttons to select Standby
Mode Upgrade, and then press the v
button.
2.
Select the desired time.
If you select the desired time, the upgrade is
automatically performed time.
| NOTE |
\ To use Standby Mode Upgrade function, your product
must be connected to the Internet.
39
|
English