Publicité
Les langues disponibles
Les langues disponibles
Press "CH"
Maximum/minimum values
Press the "MEM" button once, the LCD will display maximum value of temperature/ humidity. The
LCD will display the minimum value of temperature/humidity if press once "MEM" button again after
the maximum value is displayed.
At the same time, there are "MAX" or "MIN" displayed on the LCD.
The temperature/humidity maximum/minimum value can be reset by pressing and holding the
"MEM" button for 3 seconds.
Please note:
If the temperature reading is below the measuring ranges, LL.L will be displayed. If the temperature
reading is above the measuring ranges, HH.H will be displayed.
Ice alert
The ice alert symbol
or +30.2
to + 37.2 .
Weather forecasting function
The weather forecast is calculated from evaluation of fluctuations in the barometric pressure and
may deviate from the actual weather conditions.
The weather station displays the following weather symbols:
Press "CH" button
Press "CH"
Automatic
Automatic
appears and flashing when the outdoor temperature at –1
Press "CH"
EN6
to + 2.9
Publicité
