Remedy Of Faults - Oase StreamMax Pump Controller Notice D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16

REMEDY OF FAULTS

Error messages
The 6-character error message is displayed in two alternating parts. First part: Err, second part: 3-digit error
number.
Display
Malfunction
Excess current on
Err
001
P1
No output current
002
on P1
Excess current on
003
P2
No output current
004
on P2
Excess temperature StreamMax Pump Controller heats up
005
Insufficient voltage
006
Excess voltage
007
Possible malfunctions
Malfunction
The unit does not switch on
StreamMax Premium flow pump does
not switch on
Possible cause
Impeller unit of the flow pump is blocked Remove blockage
Impeller unit soiled
Impeller unit worn
Incorrect flow controller setting
Flow pump defective
StreamMax Pump Controller defective
Plug in socket P1 is not positioned
correctly
No flow pump connected
Impeller unit of the flow pump is blocked Remove blockage
Impeller unit soiled
Impeller unit worn
Incorrect flow controller setting
Flow pump defective
StreamMax Pump Controller defective
Plug in socket P2 is not positioned
correctly
No flow pump connected
excessively
Ambient temperature too high
· Power pack defective
· Incorrect power pack connected
Cause
No supply voltage
Flow pump not connected
StreamMax Pump Controller not config-
ured
Remedy
Regularly clean the impeller unit
Replace the impeller unit.
Push the flow controller in the outlet direction
up to the stop (5 D)
Replace flow pump
Replace StreamMax Pump Controller
Check plug for correct position.
Connect flow pump
Regularly clean the impeller unit
Replace the impeller unit.
Push the flow controller in the outlet direction
up to the stop (5 D)
Replace flow pump
Replace StreamMax Pump Controller
Check plug for correct position.
Connect flow pump
Set up the unit so that fresh air can always
circulate around the housing.
· Set up StreamMax Pump Controller at a cool
location.
· Reduce ambient temperature
Replace power pack
Remedy
Connect the unit to the mains
Insert plug of the flow pump in socket P1
or P2
Configure StreamMax Pump Controller
- EN -
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

3391933944

Table des Matières