Gree GUD35P/A-T Manuel D'utilisateur page 38

DC Inverter U-match Series Duct Type Unit
Model
GUD35P/A-T, GUD35PS/A-T
GUD50P/A-T, GUD50PS/A-T
GUD71P/A-T, GUD71PS/A-T
GUD85P/A-T, GUD85PS/A-T
GUD100PH/A-T, GUD100PHS/A-T
GUD125PH/A-T, GUD125PHS/A-T
GUD140PH/A-T, GUD140PHS/A-T
GUD160PH/A-T, GUD160PHS/A-T
3.2.7.2 Return Air Method
(1) The default ex-factory return air method is from the back. The return air cover
shall be installed at the bottom of the unit, as is shown in the following figure:
(2) If the downward return air method is adopted, then install the return air cover at
the back of the unit after dismantling it.
(3) Connect the return duct to the return air inlet of indoor unit with rivet, and the
other side shall be connected to the return air inlet. For the convenience of free
Return Air Inlet
Supply Air Outlet
Item
A
122
122
142
195
195
34
Return Air Inlet
B C
585 700
885 1000
1185 1300
746 960
1150 1360
Unit: mm
D
200
200
220
264
264