Klarstein VARICOOK SLIM Mode D'emploi page 28

EN
28
Large hotplate
(1) Switch on
1. Insert the plug into the socket. You will hear a beep and the display will show
[L].
2. Press the on/off button and the display will show [0N].
3. The appliance checks whether you are using suitable cookware. If yes, the
display shows [0N]. Press the function button and set the desired values. The
stove turns on.
4. If you use unsuitable cookware, no settings can be made when you press the
function key. You will hear a warning signal and the display will show the error
message [E0]. The unit switches to standby mode after 10 seconds.
(2) Setting the power
1. Press the function key and the power control lamp [P] lights up.
2. After switching on, the power is automatically set to 1600 W.
3. Use the slider buttons by swiping your finger between [+] and [-] to adjust the
power in 10 levels from 200-1600 W.
(3) Adjust temperature
1. Press the function button 2x and the temperature indicator light [°C] will turn
on.
2. After power on, the temperature is automatically set to 240 °C.
3. Use the slider keys by swiping your finger between [+] and [-] to adjust the
temperature in 10 steps from 60-240 °C.