The Eco-Function - Sentiotec PRO-C2 Instructions De Montage Et Mode D'emploi

Instructions for use for the user

12. The Eco-function

The Eco-function allows you to save energy in breaks between sauna sessions.
When the Eco-function is activated, the connected devices run with reduced
power. You can choose between a 20-, 40- or 60-minute sauna break.
The sauna heater is switched on again before the end of the break. In this way
the preset temperature is reached again at the end of the sauna break.
Perform the following steps to activate the Eco-function:
1. Turn the function selector 2 to position H (Eco-function).
► The Eco symbol lights up.
2. Use the intensity selector 3 to set the preferred duration of the break.
● E20 stands for a 20-minute sauna break.
● E40 stands for a 40-minute sauna break.
● E60 stands for a 60-minute sauna break.
3. Press the intensity selector 3.
► The intensity selector 3 lights up.
► Additional display 1 displays in how many minutes the sauna heater
is to be switched on in order to reach the preset temperature before the
end of the sauna break.
WORLD OF WELLNESS
p. 43/48
EN