Before Operation; Setting Up The Clock; Kitchen Timer Function - Sharp R-890 Mode D'emploi

Plug in the oven. The oven display will display: "1:00" and "
once.
This model has a clock function and the oven uses less than 1.0W in stand by mode.
To set the clock, see below.
Your oven has a digital clock feature, you can choose to set the clock time in 24 or 12 hour
cycle in stand by mode.
1. Press the
and the clock indicator "
2. Press the
indicator "
3. After choosing the hour cycle, press number keys '' 10Min'' , ''1Min'' , ''10Sec'' to input the
clock time .
4. Press the
thedigital time will flash on the display and the clock indicator "
NOTES:
• In the process of clock setting, if the STOP/CLEAR key is pressed, the oven will go back to
the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will in-
termittently show "1:00" after the power is reinstated. If this occurs during cooking, the
programme will be erased.
You can use the kitchen timer function, in instances where microwave cooking is not in-
volved for example to time boiled eggs cooked on conventional hob or to monitor the
standing time for cooked/defrosted food.
Example:
To set the timer for 5 minutes.
1. Press (KITCH-
EN TIMER/SET
CLOCK) key once,
the icon '':'' will
flash and the clock
indicator "
illuminate.
When the timer arrives at 0:00, an audible signal will sound once, and the LCD will display
the time of day.
You can enter any time up to 99 minutes 50 seconds. In kitchen timer sta te, the kitchen time
will be diaplayed for 5 seconds.
To cancel the kitchen timer function , You can press STOP/CLEAR key within 5 seconds.
R-890_OM_WEST.indb 16
(KITCHEN TIMER/SET CLOCK) key once for 3 seconds, " Hr 24" will display
" will illuminate.
(KITCHEN TIMER/SET CLOCK) key twice, ''Hr 12" will display and the clock
" will illuminate.
(KITCHEN TIMER/SET CLOCK) key once to start the clock. The icon '':'' of

KITCHEN TIMER FUNCTION

2. Press number
keys ''10Min'' ,
''1Min'' , ''10Sec''
to input time .
" will

BEFORE OPERATION

" , an audible signal will sound

SETTING UP THE CLOCK

3. Press the
(START/QUICK
START) key to
start the timer.
GB-16
" will disappear.
4. Check the display.
(The display
will count down
through the pro-
grammed time
and the indicator
will flash)
2018-02-12 16:56:49