Noise/Vibration Information; Ce Declaration Of Conformity - Carat DS-4000 Mode D'emploi

Noise/vibration information

Measured in accordance with EN 60745-2-22
Model no. : DS-4000
Noise level:
L
Vibration level:
a
The vibration emission level has been measured in accordance with a standardised test given
in EN 60745; it may be used to compare one tool with another and as a preliminary assessment
of exposure to vibration when using the tool for the applications mentioned
- using the tool for different applications, or with different or poorly maintained accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when it is running but not actually doing the job,
may significantly reduce the exposure level
! protect yourself against the effects of vibration by maintaining the tool and its accessories,
keeping your hands warm, and organizing your work patterns

CE Declaration of Conformity

•We declare under our sole responsibility that this product is in conformity with the following
standards or standardized documents: EN 60745, EN 61000, EN 55014 in accordance with the
regulations 2006/95/EC, 2006/42/EC, 2014/30/EU, 2011/65/EU
•Technical file at: CARAT Nederland B.V.
Nikkelstraat 18, 4823 AB Breda, The Netherlands
Director: C.J. van Beek
01-08-2018
CARAT Nederland B.V.
Nikkelstraat 18, 4823 AB Breda, The Netherlands
: 105.0 dB(A)
pA
2
= 3.9 m/s
h
GB
L : 116.0 dB(A)
wA
2
K = 1.5 m/s
49
K= 3.0 dB(A)