Safety; Explanation Of Symbols; Intended Use - WIKA PSD-4-ECO Mode D'emploi

3. Safety

3. Safety

3.1 Explanation of symbols

WARNING!
... indicates a potentially dangerous situation that can result in serious injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or damage to property or the
environment, if not avoided.
WARNING!
... indicates a potentially dangerous situation that can result in burns, caused by hot surfaces or liquids,
if not avoided.
Information
... points out useful tips, recommendations and information for efficient and trouble-free operation.

3.2 Intended use

The instrument has been designed and built solely for the intended use described here, and may only be used
accordingly.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.
Intended use
The model PSD-4-ECO pressure switch is used for the switching of circuits as a function of the measured pressure
via a PNP or NPN output signal. In addition, the pressure value can be output to appropriate read-out units as a
standardised analogue signal (4 ... 20 mA or DC 0 ... 10 V) or digital signal (IO-Link 1.1). The switching conditions can
be programmed directly at the pressure switch or by means of IO-Link 1.1 (switch and reset points, normally closed/
normally open, ...). Via the different display elements of the pressure switch, switching states and pressure values can
be read on site.
WIKA operating instructions, model PSD-4-ECO
EN
7