WIKA PSD-4-ECO Mode D'emploi page 31

9. Specifications
Specifications
Service life
Ingress protection
Mounting position
Electrical connection
Plug connection
Short-circuit resistance
Reverse polarity protection
Insulation voltage
Overvoltage protection
Pin assignment
Materials
Wetted parts
Non-wetted parts
Case
Keyboard
Display window
Display head
Pressure transmission medium
1) < 16 bar [250 psi] with increased overload safety
WIKA operating instructions, model PSD-4-ECO
100 million load cycles (10 million load cycles for measuring ranges > 600 bar [8,000 psi])
IP65 and IP67
The stated ingress protection (per IEC 60529) only applies when plugged in using mating
connectors that have the appropriate ingress protection.
as required
Circular connector M12 x 1 (4- or 5-pin)
S+ / SP1 / SP2 vs. U-
U+ vs. U-
DC 500 V
DC 36 V
see product label
Stainless steel
304L
PBT
PC
PBT
Synthetic oil for all gauge pressure measuring ranges < 10 bar [150 psi]
pressure measuring ranges.
EN
and all absolute
1)
31