Capitani SL 9500 Manuel D'instructions page 40

With this professional steam iron you will save plenty
of time and obtain the best ironing results.
Notice
How to use: fill the boiler. For the filling procedure
see: 'Preparing the appliance ready for use'.
- Flick the accessory socket door (10) wide open
and fit the quick connection of the iron (y) to the
socket on the front of the appliance. Press the
connection in as far as it will go.
- Close the accessory socket door (10) so that is
rests on the body of the quick connection and check
that the two elements are properly engaged. Fig. 22.
- Switch on the machine at the main switch (4) and
push the boiler heating button (5). As soon as the
green control lamp (ready for operation) (5) is on,
you can work with the iron.
- Turn the steam handwheel (7) on the appliance
anticlockwise to adjust the steam volume to the min.
position.
- Adjust the iron temperature to the fabric to be ironed
using the temperature knob (18). Fig. 23
- Push the steam on/off button (19) on the handle of the
iron to activate or deactivate the steam function. Fig. 24.
OPTIONAL ACCESSORY FOR SUCTION ONLY
side on top of the hollow strip and close it with the tubular piece. Place the end of the hose
handle on the valve and vacuum until the air inside the bag has been eliminated. Cap the valve
with the safety plug provided. To restore packed items to their normal volume, just remove the
OPTIONAL ACCESSORIES
IRON
VACUUM KIT
This kit allows pillows, duvets, clothes, blankets, etc. to
be vacuum-packed and protected from dust, moths,
mite, etc. The volume of these items can be reduced to
up to 70%.
HOW TO USE: place the item you want to vacuum-
pack in the bag provided. Place the bag with the open
37
Fig. 22
Fig. 23
19
Fig. 24
18