Capitani SL 9500 Manuel D'instructions page 32

Connecting the bristled frames to the brush (i).
Two different types of frames can be attached to the swivel multifunction
brush to clean and care for all surfaces:
- bristled frame with rubber lip attachments (l), suitable for hard surfaces,
for best steam collection;
- bristled frame (m) with attachments (o – o bis) suitable for loose and
fitted carpets, etc...
To fit the attachments (o – o bis) to the bristled frame (m), simply slide the
frames in the guides provided with the tabs facing inwards. Fig. 6.
- bristled frame (m) with brush inserts (n – n bis) for the vacuum cleaning
function. To fit the brush inserts, introduce the brush insert (n) into the rear
guide of the bristled frame (m) and the brush insert with alternate bristles
(n bis) into the front guide of frame (m) as shown in picture 8.
To attach the desired frames (l, m) to the brush (i), simply place the frame
on the brush and press down until the tab engages in the slot provided
on the universal portion of the multi-function swivel brush (i). Fig. 7.
NOTE
Before cleaning carpets, discharge any residual condensate by
pressing the button (e) on the work hose handle (d).
l
x bis
x
m
o bis
8
o
29
o bis
i
Fig. 6
Fig. 7
n
m
o
i
n bis
Fig. 8