Base (20) - Sony SU-WL450 Informations D'installation

2
Select Wall mounting style. It is
selectable as shown below.
2-a Standard mount
2-b Slim mount
Refer to the table of step 1.
WARNING
 When 2-b is selected, rear terminal access is limited.
2-a
3
Refer to the below table about
the Base Adaptor fitting
location. In case of selecting
2-b, then skip this step.
Model Name
KD-65A8
KD-65A89
KD-65A87
KD-65A85
KE-65A8
KE-65A89
KE-65A87
KE-65A85
KD-55A8
KD-55A89
KD-55A87
KD-55A85
KE-55A8
KE-55A89
KE-55A87
KE-55A85
b
d
2-b
Hook location
b
a
c
− 9 (GB) −
Fit Base Adaptor  by using
Screw (PSW 4x10)  to Base
(20)  when selecting 2-a.






4
Decide the positions of the
screws for installing the Base
(20) .
Refer to the specifications on page 16.
When selecting 2-a, please use the hole
positions of Base Adaptor .
WARNING
 Determine the strength of the wall the TV will be
mounted on. Reinforce the wall sufficiently, if
necessary.
 The wall that the TV will be mounted on should be
able to support a weight of at least four times that of
the TV (Refer to your TV's Reference Guide for its
weight.).
2-a


2-b






GB