Installing The Tv On The Wall - Sony SU-WL450 Informations D'installation

4
Detach the Table-Top Stand
from the TV.
 Remove one side of the Table-Top Stand
at a time. Firmly hold the Table-Top
Stand securely with both hands while
the other people lift up the TV.
 Repeat the previous step and remove
the other side of the Table-Top Stand.
Note
 Three or more people are required to detach the
Table-Top Stand.
 Be careful not to use excessive force while detaching
the Table-Top Stand from the TV as it may cause the
TV set to fall resulting in personal injury or physical
damage to the TV.
 Take care when handling the Table-Top Stand to
prevent damage to the TV.
 Be careful when lifting the TV as the Table-Top Stand
is detached, the Table-Top Stand may topple over
and cause personal injury.
 Take care when removing the Table-Top Stand from
the TV to prevent it from falling over and damaging
the surface that the TV is sitting on.

Installing the TV on the wall

WARNING
 Be sure that two or more persons (three or more
persons for 75 inches and above TV set) hold the TV
when carrying it.
1
Lift the TV.
 For the location of the Pulleys  to the
hang on the Base or Base Adaptor, refer
to the table of step 3 in "Installing the
Wall-Mount Bracket to the wall" on page
9.
 Make sure that the rear of the TV
touches the Base or Base Adaptor when
holding the TV.
Note
 Hold the TV securely with both hands.
− 13 (GB) −

GB