Diode and continuity testing
Range
Resolution
Accuracy
Max.measuring
Max.off-
1mV
±(1.5% + 5D)
1.5mA
3.3V
* for 0.4 to 0.8V
Overload protection : 500Vd.c./a.c. (max.)
è
Continuity testing : The internal sounder will operate if the resistance is less than 50
.
Automatic power off
The meter switches itself off automatically approx. 10 minutes after being switched on. It can be switched back on
again by pressing the "Power Reset" button.
Audible signal
An audible signal is given if a test lead is plugged into the µA/mA jack but the function switch is not turned to the µA/
mA range, and similarly for the 10A range.
16