Enjoying Multiplex Broadcast Sound (Dual Mono) - Sony HT-ST9 Manuel D'instructions

Home Theatre Control
The icon of the Home Theatre Control app appears on the TV screen.
You can change the settings of the system (such as change an input
or sound field) by using the remote control of your TV.
Notes
 Your TV must be connected to Internet to use the Home Theatre Control
function.

The Home Theatre Control function is a proprietary function of Sony.
This function cannot operate with devices other than those
manufactured by Sony.
Language Follow
When you change the language for the on-screen display of the TV,
the system's on-screen display language is also changed.
Notes on HDMI connections
 Use an HDMI cable (High Speed HDMI Cable with Ethernet). If you
use a standard HDMI cable, 1080p, Deep Color, 3D, and 4K content
may not be displayed properly.
 Use an HDMI-authorized cable. Use an HDMI cable (High Speed
HDMI Cable with Ethernet) manufactured by Sony bearing the logo
indicating the cable type.
 We do not recommend using an HDMI-DVI conversion cable.
 Audio signals (sampling frequency, bit length, etc.) transmitted
from an HDMI jack may be suppressed by the connected device.
 Sound may be interrupted when the sampling frequency or the
number of channels of audio output signals from the playback
device is switched.
 When [TV] input is selected, video signals via one of the HDMI IN 1/
2/3 jacks selected last time are output from the HDMI OUT (ARC)
jack.
 This system supports Deep Color, "x.v.Color," 3D, and 4K
transmission.
 To enjoy 3D content, connect a 3D-compatible TV and video device
(Blu-ray Disc Player, "PlayStation ® 4" etc.) to the system using HDMI
cables (High Speed HDMI Cable with Ethernet), put on 3D glasses,
and then play back a 3D-compatible Blu-ray Disc, etc.
 To enjoy 4K content, the TV and players that are connected to the
system must be compatible with 4K content.
Enjoying multiplex broadcast sound (Dual
Mono)
You can enjoy multiplex broadcast sound when the system receives
a Dolby Digital multiplex broadcast signal.
Note
To receive a Dolby Digital signal, you need to connect a TV or other
devices to the DIGITAL IN (TV) jack with a optical digital cable.
If your TV's HDMI IN jack is compatible with the Audio Return Channel
function (page 25), you can receive a Dolby Digital signal via an HDMI
cable.
Press AUDIO repeatedly until the signal you want appears in the
front panel display.
"MAIN": Sound of the main language will be output.

 "SUB": Sound of the sub language will be output.
"MN/SB": Mixed sound of both the main and sub languages will be

output.
33
US