Recording - Sony TA-AV561A Mode D'emploi

Recording

This amplifier makes it easy to record to and from the
components connected to the amplifier. You don't
have to connect playback and recording components
directly: once you select a programme source on the
amplifier, you can record and edit as you normally
would using the controls on each component.
Before you begin, make sure you've connected all
components properly.
Function buttons
Playback component
(programme source)
ç: Audio signal flow
Recording on an audio tape or video tape
You can record on a cassette tape or video tape using
the amplifier. See the instruction manual for the
cassette deck or VCR if you need help.
1
Press one of the function buttons to select the
component to be recorded.
2
Set the component to be ready for playing.
For example, insert a CD into the CD player.
3
Insert a blank tape into the recording deck and
adjust the recording level, if necessary.
4
Start recording on the recording deck and then
start playing the component.
Recording component
(tape deck, VCR)
Amplifier Operations
9 EN