Using Preset Sound Fields; Using The Superwoofer - Sony TA-AV561A Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using Preset Sound Fields

You can take advantage of sound fields simply by
selecting one of the five pre-programmed ones
according to the programme you want to play.
SOUND FIELD
1
Press one of the SOUND FIELD buttons so that
the sound field you wish to use is displayed.
Select the appropriate sound field as follows:
To reproduce
Press
1 ROCK
Powerful, clear sounds, emphasizing low
and high audio.
2 POPS
Light, bright sounds, emphasizing high and
middle range audio.
3 CLASSIC
Broad, open sounds with plenty of
reverberation using a surround effect.
4 MOVIE
A theatre-like environment using
a surround effect.
5 GAME
Maximum audio impact from video game
software using a surround effect.
To turn off the sound fields
Press SOUND FIELD selected in Step 1.
OFF appears in the display, and the sound field's effect is
defeated.
When you use the remote
Press SOUND FIELD.
Each time this button is pressed, the display changes as
follows:
ROCK
"
"
POPS
OFF
"
GAME
When you want to listen to CLASSICS, MOVIE or
GAME without a surround effect
Press one of the SURROUND MODE buttons to turn off
the respective indicator.
"
CLASSIC
"
"
MOVIE
Using Sound Fields

Using the Superwoofer

You can use the superwoofer to re-enforce the bass
sound of your front speakers and obtain a greater sense
of atmosphere. Use the remote to adjust the
superwoofer from your listening position.
SUPER
WOOFER
A
B
ON/OFF
0
ª
SUPER
WOOFER
PHASE
LEVEL
CONTROL
WOOFER
+/–
1
Press SUPERWOOFER ON/OFF to turn on the
woofer.
The SUPERWOOFER indicator lights.
2
Press LEVEL CONTROL WOOFER, then + or – to
adjust the superwoofer level.
The woofer level is indicated on the level meter in
the display.
3
Press PHASE to select the polarity that provides
the best bass reproduction.
You can also adjust the superwoofer using the
controls on the amplifier
1 Press WOOFER ON/OFF to turn on the woofer.
The SUPERWOOFER indicator lights.
2 Press WOOFER to select the woofer adjustment
mode. The woofer level is indicated on the level
meter in the display.
3 Press + or – to adjust the woofer level.
Notes
• You can only adjust the woofer level when the woofer is
on (when the SUPERWOOFER indicator is lit).
• You cannot use the superwoofer when you select PHONO.
p
P
·
)
+
+/–
SUPERWOOFER
WOOFER
indicator
WOOFER ON/OFF
13
EN

Publicité

Table des Matières
loading

Table des Matières