Airpress HL 425-24 Manuel D'instructions page 20

ENGLISH
TABLE OF CONTENTS
1.0 Prefatory note
2.0 Safety instructions
3.0 Placing
3.1 Electric connection
3.2 Air connection
4.0 First use
5.0 Operation
6.0 Maintenance
7.0 Possibilities of failure
8.0 Technical details
Spare parts
ATTENTION
To be able to use this compressor installation properly, a number of mea-
surements must be taken. The following points will contribute to making you a
satisfied user of this installation.
1.0 PREFATORY NOTES
Buying your Airpress compressor installation, you have become the owner of a
compressor installation with a high performance and reliability level. Correct use
and regular maintenance will increase the life of the compressor.
In this manual you will find operation and maintenance instructions. Read it
carefully and keep it as a guide to your compressor.
The compressor has been designed to supply compressed air. In particular the
appliance cannot be used to produce air to be breathed by humans or used on
direct contact with foodstuffs. The appliance must be used only for the purpose
for which it was specifically designed. All other uses are to be considered
incorrect and therefore unreasonable. The manufacturer cannot be held
responsible for any damage resulting from improper, incorrect or unreasonable
use. This machine is not suitable for external installation.
1 Air filter ( on the back)
2 Non return valve
3 Safety valve
4 Pressure switch
5 Reducing valve
6 Quick coupling reduced pressure
6.1 Quick coupling tank pressure
7 Gauge reduced pressure
page 18
page 19
page 20
page 20
page 20
page 22
page 22
page 23
page 24
page 25
page 34/35
Legend (fig. A)
8 Pressure gauge for pressure of air
9 Plug
10 Draintap for condensation water
12 Oil inspection glass
13 Oil plug
14 Thermical switch
20