Before You Begin; Getting Started; Data Rating Label; Surface Burners - Thermador PROFESSIONAL PCG304G Mode D'emploi

Before You Begin

Getting Started

Remove all tape and packaging before using the appliance.
Destroy the packaging after install. Never allow children to
play with packaging material.

Data Rating Label

Record the Model and Serial number on page 25. The
model and serial numbers are found on the Rating Label
Plate. The Rating Label Plate is located on the front,
underside of the chassis, as shown in Figure 2.
The model and serial number must be provided when
calling Customer Support for assistance. Enter this
information on the Product Registration Card included with
this product then mail it to the indicated address.
Before You Begin
Figure 2: Data Rating Plate

Surface Burners

1. Ensure that the burner caps are correctly seated on the
burner bases of the range's cooktop (see page 9).
2. Turn on each burner to check for proper flame color.
See "Flame Description" on page 11 for details.
The THERMADOR PROFESSIONAL
occasionally has a smell or smoke when first used. These
smells or smoke comes from the burning off of
manufacturing residues and is typical of any new appliance
regardless of manufacturer.
Please note that some pets or humans can be sensitive to
the odors created during any high heat cooking whether it
is a manufacturing residue burn off or food so it is
recommended that those potentially affected be removed
from the kitchen area.
IMPORTANT:
All knobs must be set to OFF before powering up the
rangetop.
To prevent unintended operation at power up, please set
all knobs to OFF.
®
rangetop
English 7