Publicité
Les langues disponibles
Les langues disponibles
Press the Navigation Key "" key to perform select this ID(press it again
to cancel selection), the selected record will be labeled "√";
Press the Navigation Key "" key to select all the data records under this
ID (press it again to cancel selection), the selected record will be labeled
"√"; Press ""ok key: delete the selected record according to the prompt.
Note: the ID list display the all ID numbers, even if there is no record under
this ID number.
6.3 delete all
On data management screen, select "Delete all" with Navigation Key, then
press "" ok key, at this time it prompts that "Delete all". You can delete
all data records stored in the device according to the prompt.
6.4 upload data
When measuring is finished, on data
management screen, select "Upload
data" to enter into upload data screen,
as shown in figure 6.5. On this screen,
you can transmit data to PC for data
management, and interpretation through
PC-80D data cable. Please refer to the ECG
Viewer Manager for detailed operation.
Chapter 7
measurement option setting
On the default menu, select the "Option",
then press the ""ok key to enter into
the optional parameters setting
for measurement, as shown in figure 7.1.
on-screen display:
• User id: Displaying the established ID No.
or "New ID". At most 100 ID can be
created. When creating a new ID, at most 30 characters can be entered;
the default ID is "00000", the number of "00000" ~ "00004" is reserved
(already created at factory) and can not be deleted.
• Mode: it is valid only for external lead wires. "Limb lead" and "Chest lead"
are optional. The "Limb lead" is external electrodes measurement with 4
ENGLISH
56
Figure 6.5
Figure 7.1
Publicité
Chapitres
