Dometic FRESHJET FJ 1700 Instructions De Montage page 14

Installation
Electrical connection
The complete circuit diagram can be found in fig. i:
Item Description
1 230 Vw mains
2 Compressor
3 Fan condenser
4 Fan condenser (FreshJet3200 only)
5 Fan evaporator
6 Battery
7 Remote socket
8 Temperature sensor
9 Heating (FreshJet1700,2000, 2200 only)
10 Heat Pump (FreshJet3200 only)
11 Soft Start (FreshJet2000, 2200,3200 only)
Keys for fig. j:
Item Description
1 Remote light switch
2 Circuit board in the air outlet unit
See fig. d
230 Vw cable
➤ Connect the roof air conditioner with the 230 Vw voltage supply.
Connect the cables (1) to a cable connector (2).
Remote light switch (not included in the scope of delivery)
You can connect the lighting to a remote light switch. This enables you to switch on
the lighting remotely.
To do this, proceed as follows:
➤ Disconnect the 2-pin plug (3) from the socket on the circuit board of the air outlet
unit.
14
FreshJet
EN