Bosch VAC090S Consignes De Fonctionnement/Sécurité page 11

BM 2610027608 10-13_VAC090 VAC140 2/6/14 4:10 PM Page 11
remoVInG anD replaCInG fIlter
1. Pull the locking latch for the filter cover and
open cover. When cover is fully open, it will
click into place
2. Grasp the filter by the edge, pull up and
remove
3. Before inserting new filter, use a moist cloth
and remove any dust and debris from the
filter compartment.
4. Insert new filter and make sure the filter is
seated firmly in place
5. Shut the filter cover, ensuring cover locks
into place
avoid accidental starting.
W RNING
Be sure vacuum and tool
switches are off before plugging in or
putting vacuum switch into power tool
activation mode. Do not keep power tool
plugged into the vacuum cleaner's power
tool outlet during normal vacuuming.
Plugging in vacuums or tools that have the
switch ON invites accidents.
When using this vacuum
W RNING
for epa lead Based paint
renovation, repair and painting program
(rrp), this vacuum is not recommended
for vacuuming carpets and rugs. Vacuum
may not be able to completely remove all
hazardous substance may cause health and
environmental hazards.
not suitable to vacuum
W RNING
hazardous
substances or dusts e.g. asbestos. Neither
the standard filter or the optional HEPA filter is
able to capture all hazardous particles and
may cause health hazards.
FIG. 9
operating Instructions
Switching the unit on: Set mode selector
or toxic
switch to on "ON".
Switching the unit off: Set mode selector
switch to off "OFF".
FILTER COVER
LOCKING L TCH
OF FILTER COVER
FILTER
(CELLULOSE)
-11-
FIG. 10
J2
normal VaCuumInG moDe
FIG. 11
FILTER
(CELLULOSE)