Step 1 Preparing; Checking The Supplied Accessories; Using The Cd-Rom Manual; Installing Batteries - Sony VPL-FHZ66 Guide De Référence Rapide

Step 1
Checking the Supplied
Accessories
RM-PJ27 Remote Commander (1)
Size AA (R6) batteries (2)
AC power cord (1)
Plug holder (1)
Terminal cover (1)
Quick Reference Manual (this manual) (1)
Operating Instructions (CD-ROM) (1)

Using the CD-ROM manual

The manual can be read on a computer with
Adobe Reader installed.
You can download Adobe Reader free from
the Adobe website.
1
Open the index.html file in the CD-
ROM.
2
Select and click on the manual that
you want to read.
Note
If you have lost or damaged the CD-ROM, you
can purchase a new one from your Sony dealer
or Sony service counter.

Installing batteries

Two size AA (R6) batteries are supplied for
RM-PJ27 Remote Commander.
To avoid risk of explosion, use size AA (R6)
manganese or alkaline batteries.
1
Remove the lid, then install the two
AA (R6) batteries (supplied) with the
correct polarity.
Preparing
While pressing the lid,
slide it.
2
Replace the lid.
CAUTION
- Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type recommended by
the manufacturer.
- When you dispose of the battery or the
product, you must obey the law in the
corresponding area or country. Do not
dispose of the battery or the product in a
fire or a hot oven, or mechanically crush or
cut the battery. It may explode or cause a
fire. Do not subject the battery to extremely
low air pressure that may result in an
explosion or the leakage of flammable
liquid or gas.
- Do not place the battery in a high
temperature place, such as under direct
sunlight or near fire. It may ignite, explode,
or cause a fire. Do not immerse or wet the
battery in water or seawater. This may
cause an electric shock.
Be sure to install
the battery from the
#
side.
13
GB
Preparing