Automatic Radio Tuning - SCHUBERTH SRC-SYSTEM POUR CASQUES S2 Manuel De L'utilisateur

RDS ON/OFF (press simultaneously 3 seconds while Radio is on)
Channel "A"
Button
• FM Radio ON / OFF (press 3 sec.)
• Switch among pre-saved stations (tap briefly)
There are two ways to search for a new radio station on your SRC-System™:
Seek and Save: (Find the next FM station)
1. Press and hold the Volume Up or Volume Down Button for 3 seconds.
• Pressing Volume Up searches upwards (higher frequency) for a station
• Pressing Volume Down searches downwards (lower frequency) for a
station
2. Tap the Channel "B" button within 20 seconds of finding the FM station
to save it as the current Preset.
Scan and Save: Scan through FM stations
1. Press and hold the Volume Up button for 6 seconds. The SRC-System™
will search upwards (higher frequency) for a station. When a station is
found, it can be heard for a few seconds.
2. To stop the scan on this station: Tap the Volume Up Button.
3. Tap the Channel "B" button within 20 seconds of finding the FM station
to save it as the current Preset.
4. To continue scan: Wait for the next station to be found.
16
Channel "B"
Button
NOTE: During Scan, tap the Channel "B" button to Fast Save the current FM station
as the current Preset.

AUTOMATIC RADIO TUNING

This feature makes finding new stations fast and easy by automatically creating a
temporary list of 6 "on-the-go" radio stations.
1. Turn on the Radio.
2. Press and hold the Volume Down button for 6 seconds.
3. Your SRC-System™ will search upwards (higher frequency) from the
current station and store the next 6 FM stations it discovers as "on the
go" stations.
4. If desired, repeat from Step 2 to store the next 6 FM stations as "on the
go" stations.
NOTE: These 6 temporary "on the go" stations cannot be saved and do not replace
the FM Presets you may have saved.
Turning off your SRC-System™ will clear the Automatic Radio Tuning stations and
restore the FM Presets.
SRC-System™
IMPORTANT SAFETY WARNING: The
learning and practice to be set up and operated safely. The user should complete the set-up of the
SRC-System™
, and become fully familiar with the functions and operations described in this
SRC-System™
Manual, before using the while riding a motorcycle. Failure to adhere to this
warning could lead to the operator of the motorcycle to become distracted and lose control of the
motorcycle, with dangerous and potentially life-threatening consequences. Once the operator of
SRC-System™
the has become familiar with its use, no adjustments or reprogramming of the
SRC-System™
should be performed while the motorcycle is in motion.
is a multi-functional device that requires