Symbols - GreenWorks ELITE M-210-SP-T Guide D'utilisation

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
SYMBOL NAME
V Volts
A Amperes
Hz Hertz
W Watts
min Minutes
Direct Current
n o
No Load Speed
/min Per Minute
Safety Alert
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Keep Hands and Feet Away
No Reach
No Slope
Keep Bystanders Away
Ricochet
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type or a characteristic of current
Rational speed, at no load
Revolutions, strokes, surface speed, orbits etc.,
per minute
Indicates a potential personal injury hazard.
Do not expose to rain or use in damp locations
To reduce the risk of injury user must read and
understand operator's manual before using this
product.
Always wear safety glasses with side shields that
are marked to comply with ANSI Z87.1.
Keep hands and feet away from blade and cutting
area.
Do not reach hands or feet under mower deck.
Do not operate on inclines greater than 15º. Mow
across the face of slopes, never up and down.
Keep all bystanders at least 100 ft. away.
Pay attention that bystanders are not injured
through foreign objects thrown from the mower.
7 7