Universal Board 32
4.2 Obligations of the operating company
The operating company undertakes to allow only those persons to work with the components and systems
who:
•
Are familiar with the basic regulations regarding work safety and accident prevention and have been
instructed in the use of the components and systems.
•
Have read and understood the safety chapter and warnings in these operating instructions.
Personnel should be tested at regular intervals for safety-conscious work habits.
4.3 Obligations of the trainees
All persons who have been entrusted to work with the components and systems undertake to complete the
following steps before beginning work:
•
Read the chapter concerning safety and the warnings in these operating instructions.
•
Familiarize themselves with the basic regulations regarding work safety and accident prevention.
5 Work and safety instructions
5.1 General
26
•
Trainees should only work with the circuits under the supervision of an instructor.
•
Observe the specifications included in the technical data for the individual
components, and in particular all safety instructions!
•
Wear personal safety equipment (safety glasses, safety shoes) when working on
circuits.
CAUTION
© Festo Didactic 8106190