Control Panel - Klarstein Metrobreeze Rom Mode D'emploi

POWER
MODE
UP/DOWN
SPEED
TIMER
88
SLEEP
WATER FULL
17

Control Panel

Press this button to turn on or off the air conditioner, and the powered indicator lamp is
normally on.
During on or timer on pressing this button can select COOL, DEHUMIDIFY, FAN etc.
The corresponding indicator lamp to the selected mode is on.
If the timer on or timer off is set, pressing UP or DOWN can adjust on/off time; in running
state of COOL or timer state, pressing UP or DOWN can adjust the set temperature; and
pressing UP and DOWN simultaneously can realize conversion between and , and is
displayed in default.
Pressing this button can select different speeds in cycle of HIGH, MID and LOW; in FAN
mode press this button for 5s to run the internal dry function, press this button for ano-
ther 5s to cancel, the corresponding indicator lamp to the selected speed is on.
Press this button to enter timer setting state, and the indicator lamp is on.
This pattern displays the set temperature in COOL and HEAT modes, and displays room
temperature in FAN and DEHUMIDIFY modes; display of °C shows current centigrade
temperature, and display of °F shows current Fahrenheit temperature.
This indicator lamp is normally on when SLEEP state is started.
In water full state this indicator lamp flickers with buzzer to prompt drainage.