Daily Care And Cleaning; Cleaning Agent - Siemens TI 91 Série Mode D'emploi

en Daily care and cleaning
Notes
The rinsing of the filter automatically
■
activates the interval for the display
of the filter change. After this interval
or after 2 months at the latest, the
filter will no longer be effective. It
needs to be replaced for reasons of
hygiene and to prevent a build-up of
limescale (which could damage the
appliance).
If the appliance has not been used
■
for a prolonged period (for example,
while you are on holiday), the
existing filter should be rinsed before
the first time the appliance is used
again. To do this, simply dispense a
cup of hot water.
Removing the water filter
If a new water filter is not inserted, the
"Water filter" function must be
deactivated.
Select "Water filter" in the menu
1.
settings.
Select and confirm the "remove"
2.
setting.
Remove the water filter from the
3.
water tank.
Re-insert the water tank.
4.
The appliance is ready for use again.
Frost protection
A service programme to prevent frost
damage during transportation and
storage. This programme completely
empties the appliance. The appliance
must be ready for use.
Press the rotary selector to start the
1.
programme.
Empty the water tank and re-insert it.
2.
The appliance emits steam.
3.
Empty the drip tray and thoroughly
4.
clean the appliance.
The appliance can now be transported
or stored.
50
D
Daily care and
cleaning
With good care and cleaning, your
l e a n i n g D a i l y c a r e a n d c
appliance will remain fully functioning
for a long time to come. In this section,
you will learn how to correctly clean and
care for your appliance.
:
Warning
Risk of electric shock!
Before cleaning the appliance, pull out
the mains plug. Never immerse the
appliance in water. Do not use a steam
cleaner.

Cleaning agent

Please observe the following
information to ensure that the different
surfaces are not damaged by using the
wrong type of cleaning agent.
Do not use:
Harsh or abrasive cleaning agents.
■
Any cleaning agents containing
■
alcohol or spirits.
Hard scouring pads or sponges.
■
Notes
New sponge cloths may contain
■
salts. Salts can cause rust film on
stainless steel. Wash new sponge
cloths thoroughly before use.
Always remove any limescale,
■
residues of coffee or milk, cleaning
or descaling solution immediately.
This residue may cause corrosion to
form.